Krestel Viewer is the Camera management software for the CCTV Client. It shows us the live video feed of the CCTV cameras on our Windows and MacOS Computers. The installation and configuration of the CMS on a computer are not so easy. Especially people who don’t know much about computers face difficulty in accomplishing such tasks. No doubt the onscreen instructions are in every software approximately. But, they are not enough to easily understood the manuals of installation and configuration of CMS like Krestel Viewer for PC.

So we are here with the detailed manual by combining the theoretical and practical procedure of installing and configuration of Krestel Viewer for PC. People who are good at understanding theory can follow the steps written and the ones who have a practical mind approach can follow the image illustrations.

First, we want to explain a bit about the Krestel Viewer itself. What it offers and what its’ not? Check out the features too. After that, we prepared a good method to install Krestel Viewer for Windows 11, Windows 10, Windows 8, Windows 7, MacOS 10, MacOS 11, MacOS 12.

What is Krestel Viewer?

As we told you before that it is the CMS that is used for camera monitoring mainly. The crystal viewer is not alone infact it works with different names. As such, there is no proper Krestel Viewer for PC but it works with the QVMS which is a brilliant client solution for many other CMS. Want to use Krestel Viewer for PC! Use the QVMS on PC because both are nearly the same.

Check out the further details about the QVMS in the below table. Afterward, click on the given download button according to your computer system software.

Download QVMS for Windows

Download Kestrel File Player for Windows

The software may not support all versions of these operating systems. Especially the low-end and discontinued versions of OS may need to update their system software to run this application software.

Installation

Step 1: Launch the QVMS Setup file on your PC after extracting the downloaded file. Simply, click on the Next button to initiate the installation.

Step 2: You must assign the disk with enough space to keep the QVMS in it, better to be higher than the required space. You can click on the Change button to choose the folder destination and hit Next to proceed.

Step 3: You need to check out the previously made selections, click on the Next button.

Step 4: Wait, until you see the installation bar gets completed. Keep patience, don’t click on the cancel option.

Step 5: Once your Windows will show you the client successful installation notice, click on the Finish button.

Login

Remember the shortcut you created! Visit the desktop and double-click on the shortcut button to launch QVMS for PC. At the first step, you will be redirected to the Login page of the Client. Now you have to enter the default username as “admin” and leave the password field blank. After entering detail, click on the Login button to get to the home interface of the Client.

Configuration

1. Click on the Device Manager tab from the Control Panel of the VMS.

2. Now click on the Manual Add button.

3. Enter the required details to connect the preferred devices.

Main View

1. Navigate back to the Control Panel.

• Click on the Main View tab.

2. Here are the live video feeds of each camera, open any angle you want to monitor.

Alternative method

This task is impossible without the involvement of Android Emulators. Such software is the one that lets us download those Android Apps whose PC version is not developed just like Krestel Viewer for PC. Due to the Android Emulation PC users can use mobile Applications.

Installation of Krestel Viewer on Windows is a pretty straightforward procedure. First, Download BlueStacks, and second, install it on Windows Laptop/Desktop whatever you are using. Afterward, you will be able to install Android Krestel Viewer through Android Emulator.

Get yourself connected with the surveillance cameras at your home or office through JAWA. It is the camera management software that allows us to connect with JAWA Smart Cameras or DIY cameras setup. This is beneficial especially when we are far away from our property. Now you don’t need to worry if someone is not there to look after you once you left. Today we are going to guide you on how to install and use JAWA for PC. Here is the thing which you need to understand that setting up a CMS on the computer is many many times difficult than the smartphones and tablets procedure.

Installation and configuration of CMS like JAWA for PC is a lengthy and difficult procedure. Many of the users can’t understand because there are no proper virtual manuals for JAWA Cameras and their usage. So, We are going to guide you on how to install JAWA for PC. And, then we will write down how to Configure JAWA with cameras on PC.

Download Links

Here are the download links of JAWA for Windows, Android, and iPhone. Mobile devices will get updates from dedicated App Stores. Computer users can get JAWA for PC Update with the CMS.

Check out the requirements to install JAWA for PC and Smartphones.

OS:

• Windows: Windows 7 SP1 (64-Bit), Windows 8, Windows 10, Windows 11 (64-Bit),
• Android: Android 4.4 or above
• iOS: iOS 8.0 or above

Processors:

• Windows: Intel Core i3 / AMD Ryzen R3 or a similar one
• Android: Android Octacore or the latest ones
• iOS: Apple A13 Bionic or above chips.

RAM:

• Windows: 3 GB for PCs or above.
• Android and iOS: 2 GB or above for smartphones.

Memory:

• Windows: 34 MB for PC
• Android: 42 MB for Android
• iOS: 143 MB

How to Install JAWA for PC

This is the manual to install JAWA for PC. Windows 11, Windows 10, Windows 8, and Windows 7 and macOS users can install JAWA on Windows and Mac from here. Also check the screenshots for the perfect following, they will help you install JAWA for PC with the Zero Error possibility. We are assuming that the user’s already downloaded the ZIP file of JAWA. So, we are writing the steps after the execution of RAR files.

1: At the JAWA Setup Wizard Screen, Click on the Next option to proceed.

2: After deciding the destination folder, click on the “Install” button to proceed. Click the “Browse” button to assign the directory if don’t! continue with the default location.

3: Wait for the CMS to get installed completely on your computer.

4: Click on the Finish button once the installation gets complete.

5: Enter the Default Username and password provided by the company. If you are using it manually it means you have to signup on your own. Keep following the below steps.

6: Click on the signup option to make an account on this CMS.

7: Enter your Email account, password, Enter Confirm Password again. Click on the register immediately after previewing the details, check your email and copy the code which JAWA app sent you, paste it in the blank.

8: Login the details which you had set while making an account, click on the Sign-in option.

9: Click on the add camera button at the JAWA CMS.

10: JAWA will try to connect with the camera, so keep patience while it’s establishing the connection.

11: If you heard the successful connection beep click on the tone has been heard option.

12: Enter the WiFi name and password of your home or office WiFi router.

13: You are ready to view the Live Video Surveillance on your computer.

You are ready to view the live feed from JAWA Video Surveillance Cameras. The monitoring on big screens is more comfortable. Smartphones are the options to view surveillance when you can’t use the Laptop or you are traveling. For us, JAWA for PC is the best for home Surveillance.

HikVision is not needy of introduction the world-class international CCTV Cameras and other tools manufacturers. They are in the industry since the beginning of the CCTV cameras trend. Providing the services in security surveillance in probably every country on the map. Their setup is wide and they deal in every scale from small homes to the entire giant size HQs or even a smart city! Dahua is considered to be their biggest competitor. Both are Chinese companies ruling the business of Security Equipment spread in the world. For the past many years, we are writing about HikVision and its products specifically software-related.

HikVision DVR Software is another product by them. This software is developed for HikVision DVR management. The client can use the HikVision DVR software for viewing live monitoring, getting assistance from the company, and for the cloud storage of their videos. Whether you are using cameras at a small scale or a large scale, this software will never discriminate the performance. HikVision has done a great job! and that’s not a new thing to hear!

HikVision clients got many option for viewing the live CCTV Camera Footages. I mans they have many tools like Hik Connect, HiLookVision, iVMS 4500, iVMS 4200, iVMS320 and hell of other tools that are related to the industry lik Hik-ProConnect one of a kind HikVision AI repairing tool.

Sorry for going offtopic, now we are coming back to our topic i.e Installation and configuration manual for HikVision DVR Software on PC.

Software Requirements

Check the software requirements and then click on the download button according to the OS you are using.

Download Hikvision DVR Software for Windows

Download Hikvision DVR Software for Mac

How to Download HikVision DVR Software for PC

After extracting the HikVision DRV Software downloaded file from the links given above, The Windows will launch the Hikvision DVR Setup file. Click on Yes to confirm that you want to start the installation wizard. At the first instance, read the license agreement and accept it to continue.

Now select the features you would like to get from within the CMS. If you are only trying the view the live feeds, you can simply select the Client installation. Here, the users need to select Storage Server and Stream Media Server facilities, check the boxes of options you want with HikVision DVR Software for PC.

You will be required to wait for a couple of seconds once you click on the Install button, Keep Patience until the installation progress bar is completed.

Once the installation process is completed, check the “Launch iVMS-4200“. If you want to “Create desktop shortcuts” boxes, before clicking on the Finish button.

Login and Configuration

1. If you are new to iVMS 4200, you need to select a password to secure your account from invaders. For your knowledge, the Default username and password are provided by the HikVision when their agent sets up the cameras. The username by default is “admin” that you can also change in the future.
   
2. Once you write down the credentials, you’ll be asked to select security questions, the password hint also, so only you can benefit from the password reset facility in the future.
   

Device Configuration

1. Click on the Device Management tab from the right pane located at the main interface of the IVMS 4200 PC,
   
2. Click on the + Add button and enter your device details to connect the camera with iVMS 4200.
   
3. After adding the devices, do ensure that all the devices are showing Online Status.
   
4. You can view the live streams by navigating to the Live Preview tab.

Read the Manual to Install and Configure KVMS Pro for PC. Alongside the theory, we also gave the image illustrations for your ease and to reduce the chance of error. Before anything else, we want to discuss the KVMS Pro and its benefits. Let’s begin with the KVMS Pro introduction.

What is KVMS Pro?

It is developed by the Aditya Infotech Company. This is the dedicated software to view the surveillance footage of your CP Plus Cameras and Alhua technology CCTV camera.

It is the remote camera viewer. Using this software users connect with the DVRs on a computer and they monitor the live coverage of the cameras. Useful for security, keeping eye on the workers, incoming, outgoing, and surroundings of the property. It is available for almost all most being used operating systems like Windows, Mac, Android, and iOS. KVMS compatibility game is nearly complete. Users will not find any difficulty in downloading the KVMS Pro executable file for PC. By the way, you can download KVMS Pro for PC from download links given by us.

Download Links

Using the KVMS Pro Client software you can view the surveillance footage of your CCTV cameras on Windows 10, Windows 8, Windows 8.1, Windows 7, and Windows XP and MacOS above Mojave.

KVMS Pro For Windows

KVMS Pro For Mac

Visit these links to download KVMS Pro for PC

Installation Manual

Here are the installation steps of KVMS Pro for PC. We request you don’t mess with the sequence. Follow the steps with help of image illustration so, you don’t have to face any crash or malfunction.

After downloading the file from the given link, you have to start the file extraction. Not a lengthy procedure just takes a few seconds. It will make the KVMS Pro For PC software for installation. You must agree to the terms and conditions of the software and then select you language in which you want to use this software. Click on the Nex button.

At the next Window select “KVMS Pro, the second option is not suitable for daily home or office usage. If you want to put the burden of storage on your computer then you can select the second option too. After making the decision click on the Next button.

Where you want to install the KVMS Pro on PC. This means, in which drive, folder, or subfolder where the KVMS Pro should appear. Or, you can continue with the default location which is Drive “C” > program files > KVMS Pro. Mark the tick on Generate Shortcut option if you want quick access on KVMS Pro for PC through Shortcut. Finally, you are ready to install KVMS Pro, click on the Install button.

Keep patience and watch the installation bar to get complete. Once the installation finish, Run the KVMS Pro, tik mark it, and then click on the Finish button to exit the installation wizard.

Login to KVMS Pro

After running the setup the Client software will open on the Windows or Mac OS Laptop or Desktop. Here the signup screen will open where you can create a password for your account. Enter the password twice, one for registration and one for confirmation. Don’t forget to select the auto-login option to avoid entering details next time. Click on the Next button.

At the next step, users have to select three security questions and give answers to them. Moreover, you can also select custom questions. Make sure you can remember the security questions and the answers. Such questions and their answers will help you in password recovery in the case, you forgot the password of your account in the future.

Back to the Login Screen, Enter the default username i.e Admin, and password i.e “You just created before”. You are successfully signed in on the KVMS Pro for Windows.

Add Device

KVMS Pro for PC Client will open on the main screen, click on the “Device” option located in the top center of the screen. The drop-down list is highlighted, select “Add Device” here.

A pop-up window will appear on the screen with all the information needed to add a CCTV camera. Then click the “Add” button.

Live View of Footage

After adding all devices, you can see all security snapshots of added devices. Go to the KVMS Pro Client main screen and select the “Live View” option. Now select the device in the left pane and see the surveillance image in the right pane.

That’s how you become able to view the live CCTV Video feed on KVMS Pro for PC. Thank you for your time and support. Please keep visiting this site daily because we are doing something that is practically helpful.

SOOVVI Int’l a reliable CMS functions like open-source CM, Supports multiple brands, and is compatible with many of the Camera Surveillance Tools like DVR, NVR, and IPC. We will guide you on how to download SOOVVI Int’l for PC. As you know that PC software installation is a bit difficult as compared to smartphone app installing. Just a few taps on your smartphone and you got the app. But when it comes to installing software like SOOVVI Int’l for PC it takes quite enough time and steps. Next to the installation, we have the configuration task which also involves many steps.

So, we are demonstrating this tutorial for the users who want SOOVVI Int’l for PC. Alongside the downloading links, there is a installation manual with images, Login with images and also the configuration with image illustrations. So, let’s begin the topic which you all are here for.

Link to Download:

Here is the download link for SOOVVI Int’l for PC

Download SOOVVI Int’l for Windows

Installation:

After extracting the field from the downloaded folder, launch the VMS-6100 Setup file on your computer. To confirm your action, click on the Next button to start the installation process.

After assigning the folder to VMS, click on the Install button. Or, you can click on the Browse button to select a preferred folder destination (it’s optional).

Right after that the previous step the installation will get started you need to wait until the installation progress bar is completed.

Once the VMS gets installed completely, you will be required to perform the following actions:

1. Check “Start Client” and “Create a desktop icon” checkboxes.
   
2. Click on the “Completed” button.

Before launching the VMS, your computer operating system will notify you about the blockade of various features. Now users have to Command Windows OS to let the VMS Bypass the Windows Defender Firewall.

Login

From the first Login Window, you have to create a superuser and enter a strong passcode to it. Do ensure to check the “Remember Password” for auto-login in the future. So, users don’t have to enter login details again and again.

For password recovery and assisting Login you will be asked to select three questions, which you will have to answer. In future you may have to enter these answers to retrieve your account, in case you forgot your password.

Configuration

Now you will see the main interface of SOOVVI Int’l. So now it’s your job to start the installation process, to connect your monitoring equipment. To do this, click on the Device Manager tab.

In the control panel, you need to click on the “+ Add device” button. A device configuration pop-up will appear on the device screen.

In this configuration popup, you must first select your preferred methods such as CloudSEE, ONVIF or IP/DDNS. Then enter the necessary details such as device name, IP address, port, CouldSEE protocol, etc.

Live View

After successfully configuring the device, navigate back to the VMS control panel.

Now select the video preview tab to see the real-time view of the connected surveillance equipment.

That’s all! Hopefully you can understand now how to install, configure and use SOOVVI Int’l for PC.

Alternatives

• Installation & Configuration: iVMS 4200 for PC, Windows 11 & MacOS Computers
• Free Download GREATEK HD for PC Windows 10, 11 & Mac 12
• Complete Guide: Download & Install SPC PRO Cloud for PC [Windows 11 & Mac 12]
• Download DMSS for PC, Windows 11 and MacOS 12 Computers
• Download EyeInCloud for Windows 11/10/8/7 [CMS for Laptop]

Q) Can I Record Videos from SOOVVI Int’l?

A) A good thing is that a built-in media gallery is provided for users who want quick access to the stored images and videos. Users are allowed to record videos and take snapshots whenever they want to. Q) Does SOOVVI Int’l Support Multi-Channeling?

Q) Does SOOVVI Int’l Support Multi-Channeling?

A) Though, you can also view a particular live feed on the fullscreen. Yes, SOOVVI Int’l supports multi-channeling, you can view multiple cameras feeds on a singular interface.

Q) What Is SOOVVI Int’l?

A) The application gives you remote access to your smart appliances and allows you to control them from wherever you like to. SOOVVI Int’l is designed to work with Wi-Fi cameras and smart devices delivered by Jovision.

Download iVMS 4200 for PC from here. If we talk about the 2 best surveillance camera network manufacturing companies in the world then surely HikVision and Dahua will leave all competitors behind including Sony and Panasonic. Specifically, HikVision is absolutely an Ace of the industry. What we like about them is that they have equally brilliant hardware and software. They developed multiple tools for the HikVision Customers. Hik Connect, iVMS series, etc. Currently, we are discussing the iVMS 4200, one of the best offers by the company.

First, we will guide you through the main procedure of installing iVMS 4200 for PC. It is the official CMS Desktop Client. Through this client, we can monitor the live video feed of HikVision Cameras. All Channels will be displayed collectively in the live preview background video tab. If someone wants to view a specific channel then one single click will display the channel on the big screen.

HikVision also developed some other Camera surveillance software like iVMS 4500 for PC, iVMS-4520 for PC, iVMS-4500 HD for PC, Hik Connect for PC, Hik Pro-Connect for PC, and many others. Pclicious never miss any tool developed by the HikVision. In the past, we have covered almost all tools as mentioned above. You can download any of your choices, iVMS 4200 for PC is just one of our Recommendations developed by HikVision.

Download IVMS 4200 on Windows

Download IVMS 4200 on Mac

Software Installation

1. Double Click the downloaded file of IVMS 4200 PC to launch it on your computer.
   
2. Users must have to Accept the license to terms & conditions after reading it and then click on Next.
   
3. Make the following choices Check or uncheck and click on the Install button:
   
   1. Select the nature of your software which you like to use i.e; Client, Server Storage, or Stream Media
   2. Choose the features whichever you want to be added to the installed software
   3. Select the destination folder where you want to keep the CMS.
      
4. Wait until the installation progress completes, it may take a few minutes or seconds of yours.
5. Now from the last tab, check the following checkboxes and hit Finish
   1. Launch iVMS-4200 Client on your computer automatically once installed
   2. Create Desktop Shortcuts, if you want double click access for iVMS 4200 for PC

Software Login

1. If you are new to iVMS 4200, you need to select a password to secure your account from invaders. For your knowledge, the Default username and password are provided by the HikVision when their agent sets up the cameras. The username by default is “admin” that you can also change in the future.
   
2. Once you write down the credentials, you’ll be asked to select security questions, the password hint also, so only you can benefit from the password reset facility in the future.
   

Device Configuration

1. Click on the Device Management tab from the right pane located at the main interface of the IVMS 4200 PC,
   
2. Click on the + Add button and enter your device details to connect the camera with iVMS 4200.
   
3. After adding the devices, do ensure that all the devices are showing Online Status.
   
4. You can view the live streams by navigating to the Live Preview tab.

Alternative Method

Read the full tutorial on how to download Android iVMS 4200 for PC.

To install iVMS 4200 for PC, we have to avail of services of third party software known as Android Emulator. Android emulators let users run Android apps for PC. iVMS 4200 is available for Android already, so we will not face any difficulty while installing iVMS 4200 App for PC through the Android emulator.

• Guide to install Nox App Player
• How to Root BlueStacks

Download BlueStacks from here. We are proceeding with Nox App Player, as it is good for both Windows and MacOS.

Steps to install iVMS 4200 for Windows and MacOS

Visit the guide to install the Nox App Player on our website. Download the Nox App Player on your Windows PC from our guide or their official website bignox.com.

Step 1: Emulator Installation

Once users completely downloaded the Nox App Player EXE file, visit the folder where you keep the downloaded files.

• Double click on the Nox Exe file. Allow the app to make changes on your computer and let the app get installed completely.

Step 2: Account Registration

It is the most important step in Emulator setup and making it ready to use. Once the Nox App Player home screen appears, click on the Google Play icon.

• Enter Google Account which is already in use means enter the existing one.
• In Case, you didn’t’ made a Google Account yet, click on Creare a new one and complete the formalities.

Step 3: Install iVMS 4200 for PC

The final Step arrives, here users have to install iVMS 4200 for PC and users have 2 ways to do it.

• You can install iVMS 4200 from Google Play in Nox App Player.
• Or, You can install iVMS 4200 APK on Nox. Download APK file from any APK provider like apkpure or apkmirror. Drag and Drop the APK file to Nox or manually upload it.

We are adding another recommendation to our list of best CMS. This time we brought the Greatek HD For PC at pclicious.net. In the past few days, we brought alot of CMS for the CCTV clients. Our team got a very good response on all of that software. So, we are quite happy to continue this series. Coming back to the topic, let’s talk about Greartek HD. We will write a short overview of the app, discuss its features, and most importantly how to install Greatek HD for PC. Not just installing we will also post the steps through which you can configure your CCTV cameras with Greatek HD for PC.

What is Greatek HD?

It is the CCTV Management tool that allows viewing real-time video feed through the IP Camera network eyes. Not just the IP Camera Network! This tool also supports DVRs, NVRs, etc. So, you are getting multiple support options in CCTV tools from just one software. GREATEK HD is designed as well as developed by the FelenaSoft company. You can get this CMS software for Windows, macOS, and Linux OS

Here are the download links of Greatek HD for compatible devices.

Smartphone users using Android and iOS devices have a simple method to install and use Greatek HD for phones. But, Windows and macOS have to pass through a lengthy procedure. The installation and configuration procedure required many steps. And, many users don’t make it to the last step due to missing some important steps.

Downloading Greatek HD for PC

So, we are going to write the whole procedure with the image illustration. The images will ensure the procedure following sequentially and also accurate installation, configuration, etc.

Double click on the file to start the installation files. If it is in a ZIP file it will take a few extra seconds for the extraction of files. Just click on the “Yes” button and the installation process will begin.

Just simply the “Next” button and you will get a new screen at the welcome setup wizard screen.

At this step, you need to choose the installation directory for the storage of GREATEK HD for PC. You can leave it by default and then click on the “Next” button. Or you can “Browse” button and select the directory where you want to install the software.

If you want an auto shortcut Click on the “Create a desktop icon”. After the selection just click on the “Next” button to proceed ahead.

At this step, just click on the “Install” button to start the installation process of GREATEK HD for Windows.

The installation may take some time so please have patience. Wait for some time until the installation gets complete.

Click on the “Launch CMS” and then click on the “Finish” button, your installation procedure is completed.

Now you have to log in to the CMS in order to connect the Cameras with Greatek HD for PC.

CMS Login and Add Cameras

Now you need to enter the default username “admin” and password required, just click on the “OK” button. (Contact your CCTV Company to get the username and password, if you don’t have)

Windows Defender firewall alert will appear on the screen, select all the options as shown below. Click on the “Allow access” button.

Software home screen will appear on the screen of the PC. You will see the “Device Config” option click on it to proceed towards adding devices.

The device manager screen will appear, first select the option “Manually Add” then enter the device credentials such as device name, IP address, port, username, etc. Then click on the “Save” button.

To access the live click on the option “Live” then double-click on the added device on the list and the live streaming will start as shown in the image below.

That’s all!

An alternative way to install Greatek HD for Windows and MacOS

We recommend Nox App Player 6 to install Greatek HD for PC, Greatek HD for Mac, and other PC systems. Follow the below steps to download and install Greatek HD for Macbook.

First Step • For downloading Nox App Player on PC, you need to visit our guide (Nox installer for PC). It will take a while to complete downloading.

Second Step • Once the downloading finishes, run the “.EXE” file to install Nox App Player on PC.  Wait for the installation and further proceeding.

Third Step • Nox App Player home screen will appear infront of you. Find the Playstore App, click on it. First, it will ask you to Log-in your Google Account. Enter the already existing account or create the new ID. If you are already using an Android smartphone or tablet. You can use that ID for Nox App Player too.

Fourth Step • Come back to Google Play on Nox. Search Greatek HD on the Google Play search bar. Click on the install button and wait. After a few minutes, Greatek HD will be installed on your MacBook.

Download SPC Pro Cloud for PC from here. If you are much into CCTV Camera surveillance in-home or office SPC PRO Cloud is a tool that you should try at least once. This tool can meet all the requirements of the security-conscious person or even a professional security person doing duty at surveillance. It is the 24 by 7 job to monitor the surveillance continuously that is not possible for a single person. We need a tool that offers us real-time playback that we recommend SPC Pro Cloud. A professional-level CMS that can deal with all canals and acres. All channels under one shelter with live going preview video tabs.

The platform is multi-support and multi-compatible. Till today users can install SPC Pro Cloud for PC, Smartphones, and Tablets. Users can get SPC Pro Cloud download for Windows, MacOS, Android, iOS.

Download SPC PRO Cloud For PC

Download SPC PRO Cloud (Canyon Devices)

If we talk about computers and their operating systems specifically! One can install SPC Pro Cloud for Windows 11, Windows 10, Windows 8, Windows 8.1, Windows 7

How to download SPC Pro Cloud for PC

• Double click on the downloaded file to extract the package and launch the SPC PRO Cloud Setup file from it. You’ll be asked to confirm the software wizard startup, click on the next button to proceed.
  
• Users are independent in the selection of a folder destination where they want to keep the software and additional files.
  
• Recheck your selection details and then proceed, click on Next.
  
• Wait for a few seconds or maybe minutes depends on processing speed, in Inshort! until SCMS is installed
  
• Once you are done with the installation, click on the Finish option to proceed.
  

SPC PRO Cloud Login/Signup

Users are using this platform for the first time, they have to use their username as Admin and leave the password field. Afterward, Click on the Login button to be directed to the program’s interface. Users who were already registered on the SPC Pro Cloud! they need to enter their credentials to proceed because SPC PRO Cloud Login is necessary for every user.

SCMS Device Set-Up

• From the SPC Pro Cloud’s control panel, click on Device Manager.
  
• Click on the Manual Add button
  
• Enter the required details to add a device and hit Ok
  

Live View on SPC PRO Cloud for PC

• Navigate to the Main View tab from the Control Panel
  
• Select your desired surveillance device from the left pane to watch its live stream

Install SPC Pro Cloud for PC through Android Emulators

Actually, the official SPC Pro Cloud PC version is not a proper app. To get a proper SPC Pro Cloud app in PC like the Android version, we need to use an Android emulator or an iOS emulator. Android emulators have a more user-friendly interface, more stability, and more efficient performance. So, we recommend using Android app installers for Windows to Download SPC Pro Cloud for PC.

Over the years, we are recommending 2 top-notch emulators BlueStacks and Nox App Player. You may find plenty of other emulators like Genymotion, Ko Player, etc. But our 2 recommended emulators are the best Android emulators for Windows of all time. BlueStacks is best for Windows and Nox is best for Mac. However, you can select any of these on supported operating systems. Follow the steps to Download SPC Pro Cloud on Windows PC.

1• First of all, you need to visit the official website of BlueStacks to download it on a PC. Visit our tutorial to download BlueStacks on Windows PC. To boost the downloading speed, you can use NordVPN for PC or ExpressVPN for PC. Or, use an internet download manager.

Visit: Guide

2• Next step is to install BlueStacks on PC. Locate the downloaded BlueStacks exe file and double click on it. The file size is above 400MBs.

3• Launch BlueStacks on PC. Select the Language which you can easily understand. At the next step, enter your Google Account which is already in use.
In case, someone doesn’t have Google Account, can create a new one. Click on the create a new account option.

4• Now BlueStacks is ready to install SPC Pro Cloud for PC. Drag and Drop the SPC Pro Cloud APK file into BlueStacks which you have downloaded. Wait untill SPC Pro Cloud APK gets installed.

5• Open the app and enjoy all features which the SPC Pro Cloud Android version offers.

Download EyeInCloud for PC, a Professional CMS for organizations, offices, and houses. We are going to guide you on how to install EyeInCloud for Windows 11, Windows 10, and previous module devices. Also, we will guide the MacOS users on how they can use EyeInCloud on MacOS for free. Let the tutorial begin with a short review of EyeInCloud.

EyeInCloud Overview

EyeInCloud is the CMS for camera surveillance. It telecasts the live video feed coming from the CCTV Cameras through DVRs, NVRs, and IPC Network. This Cloud surveillance tool is available on Windows, macOS, Android, and iOS. So, we can say you are getting nearly complete compatibility. Sorry to Linux users they have to manage their Surveillance tool on their own.

If we talk about at what scale EyeInCloud Works! It nearly deals with all three scales. You can use the EyeInCloud for small scales like Home usage, Apartment surveillance, Studio Apartments, etc. It also deals pretty well with medium scale enterprises, Office with the complete floor, multiple rooms, a Warehouse, etc. EyeInCloud can come in handy when it comes to CCTV Setup at giant-size headquarters, buildings, Malls, etc. But, we recommend dealing with a proper company like HikVision and Dahua, these options are more convenient at a large scale.

Requirements, Download Links, and Key Features

Here are the requirements to Download EyeInCloud for Windows, Mac, Android, and iOS. Download Links through which you can download the CMS on compatible devices. Also, check out the features which make this Cloud Surveillance tool worth downloading, Install and use.

Requirements

Download Links

Here are the download links.

Check out the noteworthy features of EyeInCloud for PC.

• Real-time live video monitoring in HD quality.
• Supports PTZ controls that are compulsory for any CMS.
• Playback option for recorded videos as well as Capture snapshots.
• Users can connect and monitor multiple CCTV cameras concurrently.
• Instant alerts of alarm notifications on motion detection and sound detection.
• Access devices from remote locations from anywhere you want, Wifi or Mobile data is compulsory.

How to Download EyeInCloud for PC

Here is the procedure for downloading EyeInCloud for Windows and MacOS. Both OS have pretty same steps involved in the installation of EyeInCloud for PC. Follow the steps in addition to the screenshots that are illustrated for accurate following and minimal misunderstanding.

Select the language that is easily understandable for him/her. We are continuing with the English.

You have to select the location, where you want to install the software then click on the Next option.

It will start installing the EyeInCloud for PC. You have to wait until the installation gets complete.

Click on the Finish button to close the installation Wizard, After the installation gets complete.

Enter the default username and password provided by the company.

Select your desired security questions and enter their answers, it is for the administration rights protection, After completing formalities click on the OK button.

Click on the Resource management option at the EyeIncloud Starter home. Through this option, a user can Add, Edit and Delete Device anytime.

Click on the Add option in order to add the IP Cameras manually.

Enter the IP Address/IP Range/Domain Name/Serial Number/URL, Protocol, Port, Username, Password, Test, Delete. After completing the Forum click on the OK.

Now head back to the EyeInCloud main home, select the Live View.

You are ready to view the live camera surveillance through the connection of EyeInCloud for PC.

That’s all! For any query, misunderstanding, or complications, You can contact us through the comment section which connects our team with our viewers.

Get Ganzview for PC Download free through this tutorial. An incredible DMS that comes with the support of PixelMaster Embedded NVRs, Digimaster H.264 DVRs, and PixelPro Camera. Got good support that makes it worth being our daily driver for camera monitoring. Also, you got many devices to support it, it is compatible with Android smartphones, iPhones with the latest iOS and Windows too. Soon the latest Windows users will get the GanzView for Win 11, the developers may take more time. Even if you didn’t get the Ganzview on Windows PC officially, Windows Subsystem for Android will emulate the Ganzview for PC Windows 11.

First, we think it is compulsory to write an overview of the software first. So, our viewers can make their concept clear, what they will get from GanzView and what they will not! Let’s begin with the GanzView Overview.

GanzView run-through

GanzView is the Driver Monitoring system that connects the Camera Network with the computer or any monitoring screen. The medium can be a DVR, or an NVR, or an IPC Network. It deals with all kinds of scales from Home monitoring, Office Monitoring, Shop Monitoring to the Mall CCTV Security, Villa Security, and Entire Head Quarters Monitoring. You can make a guess how much Powerful GanzView is.

All the Additionals and Essentials for remote surveillance are available on GanzView. Users can enjoy the features like Remote Monitoring with Pan, Tilt, and Zoom. How many cameras you want to add to GanzView, Surely! it will not a big issue for the GanzView to handle. Single, quad, 9, and 16 channel access via live video streaming at a time. Even you can request additional space from the GanzView management company.

Users can make a Cloud Storage arrangement for the videos as they consume alot of space. This DMS has the video playback option during the live surveillance, that’s another appreciatable aspect.GanzView Works on the Windows 7, Windows 8, and Windows 10. Android and iOS apps are also available on Google Play Store and App Store respectively.

Download Links

Here is the direct download Link to install GanzView on Windows 10, 8, 7. Windows 11 users have to wait for a while.

Download GanzView For Windows

Users who want to get smartphone app on their iPhones, Galaxies, and other devices can get that from the below links.

GanzView For Android

GanzView For iOS

How to Download GanzView for PC

Procedure to download GanzView for PC and how to configure it is written below. We are taking the help of screenshots to make you understand better. Kindly, don’t skip any step written here, skipping can cause software misconfiguration or even malfunction.

Step 1 – At the DMS installation starter pack, you need to select one from 2 options. Typical and Custom! Typical will install the software with regular options. Custom will install the software with the options of what features you want in GanzView. We are continuing with the Typical option. Click on the Next.

Step 2 – Click on the Next option when the “Welcome to the DMS Setup Wizard” Screen appears.

Step 3 – Where you want to install the software, Choose the location. Or Continue with the default location. Click on the Next option after making your decision.

Step 4 – Do you want to create a shortcut of Ganzview on Desktop? Yes! or no! Click on the Next option.

Step 5 – As the software is ready to install, you need to click on the Install option.

Step 6 – Keep patience Untill the GanzView DMS software gets installed on your computer.

Step 7 – Once the installation gets complete, click on the Finish option.

Step 8 – Click on the Allow Access Option to grant permission to Ganzview to bypass the Windows Defender Firewall.

Step 9 – Let the GainView DMS load the Home screen, it will take some time while you are loading it at the first time.

Step 10 – Login with the default username and password provided by your CCTV company.

Step 11 – Add the new cameras to GanzView, Now click on the down aero next to the Configuration option.

Step 12 – A drop-down menu will open, here select the device option. The new window will open here click on the Add button.

Step 13 – You are ready to view the live video surveillance on your computer screen through GanzView for PC.

Step 14 – That’s how you install GanzView for Windows and make it ready to view the live video surveillance on your PC. This procedure was specifically for Windows users. MacOS users are not welcome here because the GanView for MacOS is not available.

For MacOS users we are writing down the procedure to install GanzView for PC Mac through Android emulators.

Installation Steps of GanzView on macOS

Likewise, the GanzView for PC Windows procedure, installation of GanzView on PC Mac is also easy. Here are the steps for downloading and using the GanzView.apk for Macbook Air/Pro and other macOS devices.

1. Download Nox App player from our guide, or use the official source that is their website.
2. Install the Nox on Mac and complete the initial formalities.
3. Once the Nox home screen appears, drag and drop the APK file into Nox and click on the install option.

That’s how you download GanzView for PC macOS operating systems.